Elcometer 7420 Digital Moisture Meter

This handy and easy to use instrument does not use pins and does not damage the substrate under test. The gauge is placed onto the material to be evaluated and quickly indicates the degree of moisture in concrete, fibreglass or wood down to a depth of 3cm (1.2")

Elcometer 7400 Compact "A" Moisture Meter

The measuring principle of the COMPACT "A" is based on the dielectric constant or high frequency method. The meter is simply placed on the material to be tested, the moisture content can be read off immediately. No need to drive pins into the wood.

Elcometer 7400 Compact Moisture Meter

The hand closes naturally around the ergonomic form of the housing so that the pins on the end of the instrument can be pressed into the material to be measured. The thin pins make it easy to measure the moisture content of sawn timber, chipboard and fibreboard materials up to a maximum thickness of 25mm as well as normal gypsum or mixed plaster.

Elcometer 7400 Compact "B" Moisture Meter

Electronic structural moisture indicator using a patented technique based on the dielectric constant/ high frequency method. The indicator is equipped with a digital LCD readout and a universally applicable ball sensor for non-destructive location of moisture concentration in all kinds of building materials as well as for assessment of moisture distribution in walls, floors and ceilings.

Elcometer 118 Surface Moisture Meter

The Elcometer 118 surface moisture meter is a general purpose gauge which indicates the percentage moisture content of a material. The scale incorporates red and green colour coding, indicating high and low levels of moisture respectively. The analogue meter includes five scales: Wood 1, Wood 2, Plaster, Concrete and a linear reference scale for comparison only.

Elcometer 7400 H65 Moisture Meter

Designed for fast measurement of moisture in timber (up to 180mm thick), particleboard and veneer. Ideal both for single and series measurements before, during and after processing wood.

Elcometer 7400 UNI 1 Moisture Meter

Electronic moisture meter indicating instrument with digital LCD readout, used with various electrodes and an additional measuring device for structural moisture using the electrical resistance method.

Elcometer 7400 UNI 2 Moisture Meter

Electronic moisture meter indicating instrument with digital LCD readout, used with various electrodes and an additional measuring device for structural moisture using the electrical resistance method.

Elcometer 7400 RTU 600 Moisture Meter

Electronic four-in-one meter designed for measurement of wood moisture, structural moisture, air humidity and temperature, with digital LCD readout. Automatic temperature compensation for wood temperatures between -10 and 80°C and very precise correction facility for all species of wood.

Elcometer Moisture Meter Electrodes

Elcometer supplies a wide range of electrodes to allow you to take measurements of moisture in almost any surface, be it building materials or wood - hard or soft. Elcometer also has a wide range of temperature and humidity probes that can be used for some moisture meters.